From Inverness (South)-Drive north over the Kessock Bridge and proceed to the Tore roundabout. Take the second exit sign posted towards Dingwall, (A835). Follow this road for about 3 miles and then turn left at the Leanaig cross-roads (sign posted to Muir of Ord/Beauly B9169). You'll see the studio on your left almost immediately next to a white cottage-take your first available left and follow that round to the bottom next to the white cottage (past the scaffolding etc) There's plenty of room to park!
From Dingwall (North) -Drive south towards Inverness on the A835. About 2 miles after the Maryburgh roundabout, turn right towards Muir of Ord/Beauly at the cross-roads AFTER the Conon Bridge turning. Again, you'll see the studio almost immediately on the left so take the first opening on your left and follow the road round!
(Click on the map to make it bigger)
If you put the post code into your sat-nav, it will take you to the wrong side of the cross roads! (The Culbokie/Easter Kinkell side)
If you pop Morrison Timber Preservation into Google Maps that should also get you here as that office is directly next to my studio!
Below are some photos of what you’ll see when you arrive so you know you’re in the right place!!
If you're interested, here's a little bit about the studio from the very beginning in late 2016...
I'm even lucky enough to have my Great Grandfather's old workbench. Nice to be putting it back into use a few generations down in a different workshop!